Command Access 4 Wire Energy Transfer Hinge
Command Access 4 Wire Energy Transfer Hinge ETH4W4545 26D
The Energy Transfer Hinge (ETH) is the ideal way to pass low voltage power from the hinge jamb to the lockset without having any exposed wires. These hinges are commonly used with electric mortise & cylindrical locks, electric strikes (when on a pair of doors), electric exit trims, latch pullback devices, door mounted card readers and low voltage door lights.
UL Listing-60LK- Flexible Connector on 2,4 & 6 wire models
High temp Teflon wire used: 4W -26/19 gauge/strand wire: 1 amp continuous rating.
5 knuckle, 3 knuckle, 2 knuckle, swing clear, anchor and pivot hinges modified
Centered access holes on most 5 knuckle hinges make for an easier installation.
4' leads available
3 year warranty
4 Wire Hinge 4.5 x 4.5 26 AWG 1A@24V per pair
Voltage: Voltage range - 22 to 28 VDC
System protection: unit shutdown when voltage exceeds 28VDC
Average In-rush Current - 1A
Average Hold Current - 180mA
PTS adjustment - approx. 1/4
Wire run: 500' with 18ga wire, 700' with 16ga wire
Configurations Available: Molex Connectors available
Weight: 2 lbs
Mfg.# ETH4W4545 26D